Social Pages

By Leticia Jensen


Maintenance of smart phones in the modern world is tough considering that most of them have no keypads hence use only sensitive touch screens for their functioning. Smart phones may breakdown due to some factors for example poor handling. Most parts are delicate hence the need for maximum care when carrying out the iphone repair auckland offers.

Start by taking time to back up data in your smart phone. This will avoid the unnecessary loss of vital data to the user. Use a computer whole doing this, by browsing through the apps till you find the iTunes app. Click on the Sync command.

Before embarking on maintenance program, ensure that all tools necessary for the task are available. Get a complete, maintenance kit carrying all necessary tools and of correct use and sizes. Check that the kit has dryers, screw drivers and tweezers that come as necessities for the program. The replacement gadgets ought to be of top quality as most smart phone parts are delicate and tiny hence the need for care.

Most smart phones have tiny screws on the bottom side near the USB connector. Using a screw driver, unscrew both screws and carefully place them on a soft cloth. Look for flaps in the top right corner. The flaps are used in handling of the screen. Carefully lift it using a wedging tool. Take care since most smart phones have two flaps.

Stickers are also used to hold the second flap. The person doing this should also detach the black clamp normally located next to its screen from its third connection. After lifting it, make sure that the screen is detached carefully from the other parts of the phone. You may be required to exert some more pressure as you detach from its screen.

Unscrew the rest of the screws. In most cases, they will be six located on the flaps, sides and the last one on the top right. A black tape is used to cover the screws from exposure hence use a sharp razor blade to remove it from each screw head. Carefully, detach the glass screen from the LCD screen. Slide the LCD glass towards the home button to clear the top flanges, apply some little force on the metal piece if need be.

Make sure the LCD screen is totally free. Take time whole cleaning the broken glass and utmost care must be taken since the same plastic frame will be re used. If need be, use a dryer to clear off the glass as so long as the heat is controlled to avoid deforming the plastic part. Rub some surgical spirit on the parts to dissolve some adhesive parts that fail to detach easily.

After doing all that, prepare the other new screen intended to be used in place of the old one. Apply glue on it as well as on its shell while paying attention to the home button. Allow the glue to settle for some time before you attach its LCD screen. Insert the screws and ensure that the cables are well connected.




About the Author:



0 comments:

Post a Comment